Crying-Face Ghost Tree with Pumpkins, 240cm | QM1403-2.4M-A

This is QM1403-2.4M-A, identified as the crying-face tree-and-pumpkin version. The black trunk face, branch structure and complete assembly shown here are the ordering reference. A different expression should not be substituted under a similar description.

The reference shows two white ghosts and three orange pumpkins. One ghost sits near the upper-right branch; the other is on the lower-left side. The pumpkins form the base cluster. Separate props in an illustrative scene are not additional included product pieces.

Start with the actual 180 × 110 × 240 cm product dimensions and review the usable area with nearby shelves, window sills and overhead fixtures included. The branch reach and pumpkin base both matter; measuring only the trunk would understate the full assembly.

A narrow window should not be assumed suitable. The scene uses a spacious area so the complete assembly can be seen. Send a location photo and measurements if your purchasing decision depends on a specific window bay.

No such effect is promised here. The supplier lists seven white lights. The imagery does not demonstrate a brightness level, motion, an internal structure or a particular operating sequence.

A small blank lower-trunk area is shown as a possible concept. The available surface is constrained by the crying face, ghosts and pumpkin cluster. Logo size, exact position and decoration method require an artwork review before production is agreed.

The confirmed minimum order is 6 pieces per model. The supplier packing reference lists 12 per carton. Packing and delivery for the requested quantity should be covered by the quotation rather than assumed from either number alone.

Send QM1403-2.4M-A and mention the crying-face version, required quantity, destination, arrival date and any logo file. Share the intended display location so the branch reach and pumpkin base can be considered in the discussion.

Identify the crying-face version in every brief

The ghost tree inflatable on this page is the QM1403-2.4M-A crying-face reference. Its identity includes the black trunk expression, branching limbs, two white ghosts and three orange pumpkins. Keep the full code and a thumbnail together when discussing it with purchasing and merchandising colleagues. A shortened line reading Halloween tree may not preserve the expression or assembly your creative team selected. If a quotation or artwork response shows a different face, resolve that discrepancy before treating the response as an approval of this item.

The ghost tree inflatable photograph is also the reference for the branch arrangement. Do not add a branch to balance a proposed logo, move a ghost to create a text area or remove a pumpkin to fit the image into a narrow layout. Those changes would alter the selected appearance. A design presentation should work around the original assembly. If another configuration is desired, describe that as a separate question for review rather than allowing a visual alteration to become an implied feature of the stock model.

Measure the whole composition rather than the trunk

The ghost tree inflatable has a listed size of 180 × 110 × 240 cm. A location review that measures only the narrow central trunk misses the branch reach and pumpkin cluster. Mark the complete product envelope on the proposed plan and identify which direction corresponds to the supplier’s length and width. Include shelves, window sills and nearby signs in the drawing. A large glass opening may still have a restricted usable area behind it, particularly where merchandise fixtures already occupy part of the bay.

For a hypothetical 200 × 120 cm space, subtracting the ghost tree inflatable dimensions leaves 20 cm and 10 cm along the respective directions. These figures are arithmetic, not recommended surrounding clearances or approval of the location. The venue must review the actual arrangement, and the full 240 cm height requires its own check. The example shows why a tree that looks compact around the trunk can still be a demanding choice for a narrow display bay. Use all three listed measurements before deciding whether a proposal should proceed.

Keep both ghosts in the intended view

The upper white ghost sits beside the right-side branch, while the second appears at the lower-left side of the ghost tree inflatable. Review those positions from the intended customer approach. A high sign could obscure one, while a low merchandising table could hide the other. This matters because the two ghosts are part of the selected composition, not interchangeable decorative extras. A front-facing product image can help a designer check the layout before a location concept is presented as complete.

When your own team prepares a ghost tree inflatable visual, retain the white fabric color and the original expressions. Do not use a glow effect to compensate for an unclear outline or draw additional eyes to make a small thumbnail more readable. Instead, reconsider the image scale or surrounding layout. If a proposed storefront is shown, identify it as an illustrative setting. Use an actual site photograph when describing a completed installation, so a buyer can distinguish the stock-product reference from evidence of a real venue display.

Separate the three pumpkins from surrounding props

The ghost tree inflatable reference includes three orange pumpkins with green stems at the base. Their different sizes and visible positions help identify this version. A seasonal scene may include separate pumpkin props elsewhere in the environment, but those are not automatically additional items in the product offer. Keep the product assembly clear in the quotation image and identify any separately requested props as other requirements. A buyer should not have to infer the supplied quantity from the total number of pumpkins visible in an illustrated store.

The ghost tree inflatable image also does not establish that the pumpkins, ghosts or branches are separately supplied or individually repositionable. If your project expects separate components, ask that question explicitly before ordering. Do not rearrange the illustrated pumpkins and present the result as a supported configuration. For receiving and artwork review, use the complete original composition as the visible reference unless a different arrangement has been specifically discussed and confirmed. This keeps a creative sketch from becoming an unintended product specification.

Use color as part of the original character

The brown branches, warm orange trunk and pumpkins, white ghosts and green stems give the ghost tree inflatable several contrasting elements. When placing it near merchandise, look at which of those elements remain clear against the actual surroundings. A busy orange backdrop might make a pumpkin edge less distinct, while a pale wall might reduce contrast around a white ghost. Address that in the surrounding display plan rather than changing the product colors or simplifying its printed faces in the approval image.

For a ghost tree inflatable campaign photograph, include the complete branches and all three pumpkins without stretching the image to occupy a wider frame. A square product reference can preserve the full shape while a separate landscape scene explains the proposed environment. Keep those purposes distinct. The product image shows what the selected item looks like; the scene communicates an idea about placement. Neither purpose requires adding a gradient glow, an invented internal light pattern or a texture that is absent from the reference.

Discuss a modest logo on the available trunk area

The ghost tree inflatable already contains several faces and a branching silhouette, so its blank surface is more constrained than a plain rectangular display panel. The lower-trunk gap above the pumpkin cluster is shown as a possible concept location. Ask to review the mark on the full product, including the crying face and nearby ghosts. A close-up alone can conceal whether the proposal crowds the original artwork. The concept is not a published print rectangle or a commitment to a particular decoration process.

If the ghost tree inflatable logo proposal is too large for the available blank area, discuss another presentation instead of moving a pumpkin or covering the crying face. A separate store sign can be considered as an additional venue element. Keep that sign outside the product specification unless it is separately requested. Send the original artwork and explain the intended visual emphasis so the production contact can review a realistic proposal. Final usable area, mark size, position and method remain subject to confirmation for the actual order.

Keep the seven-white-light reference specific

The supplier lists seven white lights for the ghost tree inflatable. The reference does not establish a flame effect or an animated branch action. If the way the lighting appears is important to the selection, request current footage of this exact crying-face version and identify the configuration in the quotation. Do not use a video of a similar tree with a different expression or a different lamp arrangement as if it were evidence for QM1403-2.4M-A.

Keep the ghost tree inflatable operating demonstration separate from the logo concept and the location illustration. Each answers a different question: appearance, proposed branding, placement idea or actual operation. A still picture cannot verify a brightness level or an installation approval. The supplier table records a 12V 0.8A blower and a 12V 1A adapter, with the listed mains range and plug options shown separately. Confirm the configuration offered for the delivery destination and request any documents the venue actually requires; do not infer a rating from the material description or a lamp count.

Connect packing information to the right decision

The ghost tree inflatable individual package reference is 19 × 14 × 28.5 cm, with an individual gross weight of 1.08 kg. These figures concern the packed item. They are not measurements of the displayed composition, a stability rating or proof that particular branches can carry another object. The carton reference is twelve pieces in 44 × 40 × 59 cm. Label packing information separately from the 180 × 110 × 240 cm product envelope when sharing a record with warehouse and merchandising teams.

The confirmed MOQ for the ghost tree inflatable is six pieces per model, not twelve. The carton quantity does not by itself specify packing for a six-piece enquiry or delivery to several locations. State the requested quantity and receiving arrangement and ask for the actual commercial proposal. Keep the crying-face image, code, approved artwork and confirmed configuration together for handover. For a later project, request current availability and timing rather than treating an older stock sheet or campaign picture as a commitment about future supply.

Review the ghost tree inflatable with the right photographs

For a remote appearance review, request a complete ghost tree inflatable view that includes every branch tip and the entire pumpkin base. A second view can concentrate on the crying face and the two ghost positions. These are specific identity checks; they do not require a photograph to reveal an internal structure or prove a material grade. Keep QM1403-2.4M-A visible in the review record. If any of the three pumpkins is hidden by a prop or cropped from the image, ask for an unobstructed view rather than approving the assembly count from an incomplete picture.