TERCEL · QT011
Soft plastic badge holders for printed credentials
The QT011 soft plastic badge holder displays a staff card, visitor pass or event credential through a clear front. Seven sizes are available. Choose by the card insert dimensions and check the outside holder dimensions separately.
Logo Customization for Small Orders
Share your branding requirements with your quote request. Confirm whether the approved design will be printed on the insert or on a suitable area of the holder. Holder-body placement and printing method require confirmation.
See the branding in use
YOUR LOGO is shown on the printed insert. Confirm holder-body print area separately.
Size options for your soft plastic badge holder
1. Match the card insert
Measure the finished card width and height, then compare it with the listed insert dimensions. The outer holder dimensions describe the sleeve itself and should not be used as its usable insert space.
View all seven outer and insert size pairs
| Outer holder (in / cm) | Card insert (in / cm) |
|---|---|
| 3.875 × 3.25 in / 9.8 × 8.2 cm | 3.38 × 2.12 in / 8.6 × 5.4 cm |
| 4.5 × 3.75 in / 11.5 × 9.6 cm | 4.13 × 2.75 in / 10.5 × 7.0 cm |
| 2.5 × 4.5 in / 6.4 × 11.4 cm | 2.12 × 3.38 in / 5.4 × 8.6 cm |
| 3.12 × 5.25 in / 8.0 × 13.3 cm | 2.75 × 4.13 in / 7.0 × 10.5 cm |
| 3.78 × 5.9 in / 9.6 × 15.0 cm | 3.47 × 4.92 in / 8.8 × 12.5 cm |
| 4.13 × 6.3 in / 10.5 × 16.0 cm | 3.74 × 5.31 in / 9.5 × 13.5 cm |
| 4.52 × 6.69 in / 11.5 × 17.0 cm | 4.13 × 5.7 in / 10.5 × 14.5 cm |
Supplier-listed inch and metric dimensions are approximate. Metric values are converted from the published millimeter measurements.
2. Check the orientation and attachment
The two wider formats suit horizontally arranged artwork. The five taller formats provide portrait layouts. Confirm the top edge and the clip that will attach to the holder before ordering a soft plastic badge holder for an existing lanyard.
3. Review what stays visible
Check that the printed name, role and logo stay within the visible window. If the card has a design that reaches its edge, use the artwork proof to identify any important information that might be covered by the holder.
For staff and guest versions, keep the printed role in a consistent location. When cards differ in size, order the matching holder format for each group. Include the quantities of each holder size in the quote request.
If you already have a lanyard or clip, provide its attachment dimensions. Confirm fit with the opening shown on the selected soft plastic badge holder. Review the complete credential setup before ordering replacement holders for an existing batch of cards.
See the supplier’s holder size reference for published configurations.
Product specifications
| Model | QT011 |
|---|---|
| Material | Soft plastic |
| Display | Clear-front badge holder |
| Size choices | Seven outer and insert size pairs listed above |
| Minimum order | 6 units per model |
| Logo customization | Available by confirmed configuration. Verify holder-body print area or printed insert requirements with your quote. |
Review the visible product details
Original photograph detail. Confirm the approved configuration before ordering.
Check the size before ordering
Compare the size reference with the full specification table and confirm your selected option.
Frequently asked questions
How do I choose the size?
Use the listed insert dimensions to match your card. Check the outer holder dimensions independently.
What is the minimum order?
Six units per model.
Can I add my logo?
Share the artwork and confirm whether branding is on the insert or an approved holder print area.
How do I request a quote?
Include QT011, quantity, selected size and orientation, card dimensions and attachment requirements. Price and lead time are confirmed with the quote.
Reviews
There are no reviews yet.